12 Essential Welding Tools for Beginners in Nigeria (2026 Guide)
The 12 essential pieces of welding equipment for fabrication work are: a welding machine, electrodes, an electrode holder and earth clamp, a welding helmet, welding gloves, protective clothing and boots, an angle grinder, cutting and grinding discs, a cut-off machine, clamps, measuring tools, and a wire brush. This list explains what each one does, what to look for, and which models we have in stock at our branches in Lagos, Abuja and Port Harcourt. Use the checklist below to set up a new workshop or fill the gaps in your current kit.
Welding equipment list: quick checklist
| # | Equipment | What it does | In stock at Tikweld |
|---|---|---|---|
| 1 | Welding machine | Supplies the current that melts the metal | Maxmech, Kaierda, Powerflex |
| 2 | Electrodes | The filler metal that joins the pieces | Ask for available brands |
| 3 | Electrode holder & earth clamp | Holds the rod and completes the circuit | Ingco 800A and 1000A holders |
| 4 | Welding helmet | Protects eyes and face from arc light | Ingco auto-darkening helmet |
| 5 | Welding gloves | Protects hands from heat and spatter | Ingco 16" leather gloves |
| 6 | Protective clothing & boots | Prevents burns from sparks and hot metal | Ingco safety boots, face shields |
| 7 | Angle grinder | Cuts, grinds and cleans metal | Bosch GWS 750, GWS 2000, GWS 20-230 |
| 8 | Cutting, grinding & flap discs | The consumables your grinder runs on | Bosch and Ingco discs |
| 9 | Cut-off machine (chop saw) | Straight, fast cuts on pipes and sections | DongCheng DJG04-355S 14" |
| 10 | Clamps | Hold parts square and still while you weld | Ingco F clamps |
| 11 | Measuring & marking tools | Accurate sizes and square corners | Ingco steel measuring tapes |
| 12 | Wire brush & chipping hammer | Remove slag and rust before and after welding | Ingco wire cup brushes and wheels |
The 12 essential welding equipment explained
1. Welding machine
The welding machine is the heart of your workshop. Most Nigerian fabricators now use inverter (MMA/stick) welders: they are light, use less power and run well on a generator. Choose the size by the electrodes you use and your power supply:
- 200–250A, single-phase 220V: gates, burglary proofs and repairs with 2.5–3.2mm electrodes. In stock: Maxmech MMA-200, Kaierda ZX7-200N.
- 315–400A: all-day workshop fabrication with 3.2–4.0mm electrodes. In stock: Maxmech MMA-400, Kaierda ZX7-315N.
- Stainless steel and aluminium: a TIG welder such as the Kaierda WS-315N, plus argon gas.
Compare every model and price in our welding machine prices in Nigeria guide.
2. Welding electrodes
Electrodes are the filler rods that melt into the joint. For general fabrication in Nigeria, most welders use E6013 (easy to strike, neat finish, good for gates and light structures) and E7018 (stronger, low-hydrogen, for structural and load-bearing work). Keep electrodes dry: damp rods spatter, crack and make weak welds. Learn more in Welding Electrodes Explained: Types, Sizes and Uses.
3. Electrode holder, earth clamp and welding cables
The electrode holder grips the rod and carries current to it; the earth (ground) clamp attaches to the workpiece to complete the circuit. Choose a holder rated above your machine's maximum current. Loose clamps and worn cables cause poor arcs and overheating. In stock: Ingco WAH10008 electrode holders, 800A and 1000A (Lekki, Port Harcourt).
4. Welding helmet
Arc light burns the eyes in seconds ("arc eye") and damages the skin. An auto-darkening helmet darkens the moment you strike the arc, so you can see your work before and after welding without flipping the helmet up and down. In stock: Ingco AHM008 auto-darkening welding helmet (Ogba, Port Harcourt). For grinding, add a clear face shield (Ingco HFSPC01, widely in stock).
5. Welding gloves
Use thick, long leather gauntlets for stick welding; they protect your hands and wrists from spatter and heat. Thinner gloves are fine for TIG, where you need more feel. In stock: Ingco HGVW02 16-inch leather welding gloves (Lekki).
6. Protective clothing and safety boots
Wear long sleeves and trousers in cotton or leather, never synthetic fabric, which melts onto the skin. A leather apron protects the chest and lap. Steel-toe safety boots protect your feet from falling steel and sparks: Ingco safety boots are in stock at Lekki, Mangoro and Port Harcourt. For gas cutting, use welding goggles such as the Ingco HSGW01 (Lekki).
7. Angle grinder
After the welding machine, the angle grinder is the tool you will use most: for cutting, bevelling edges before welding, grinding welds smooth and removing rust and paint. Most workshops keep two:
- 4.5-inch (115mm) for light grinding and finishing, such as the Bosch GWS 750.
- 7–9-inch (180–230mm) for heavy cutting and grinding, such as the Bosch GWS 2000 or GWS 20-230.
Bosch angle grinders are in stock at Mangoro, Ogba, Ikeja, Port Harcourt and Calabar.
8. Cutting, grinding and flap discs
Use the right disc for the job: thin cutting discs (1–3mm) for cutting, thick grinding discs (6mm) for removing weld and metal, and flap discs for smooth finishing. Never grind with a cutting disc; it can shatter. Check the disc's maximum speed matches your grinder. Bosch and Ingco discs are in stock at all our Lagos branches and Port Harcourt.
9. Cut-off machine (chop saw)
For fast, straight and square cuts on pipes, angle iron and box sections, a cut-off machine is much quicker and more accurate than a hand grinder. In stock: DongCheng DJG04-355S 14-inch (2200W) cut-off machine (Mangoro, Ogba, Abuja Kubwa, Calabar).
10. Clamps
Clamps hold pieces in position so your joints stay square and do not move as the metal heats and pulls. Keep several sizes. In stock: Ingco F clamps from 50x200mm to 120x500mm (Mangoro, Lekki).
11. Measuring and marking tools
Accurate fabrication starts with accurate measuring: a steel measuring tape, a try square for 90° corners and a soapstone or scriber to mark steel. Ingco steel measuring tapes (3m to 10m) are in stock at Ogba, Lekki, Ikeja and Port Harcourt.
12. Wire brush and chipping hammer
Clean metal makes strong welds. Use a wire brush to remove rust and paint before welding, and a chipping hammer to knock off slag after each pass. A wire cup brush or wire wheel on your grinder speeds this up: Ingco wire cup brushes and wheels are in stock at Mangoro and Lekki.
Extra equipment for a professional fabrication workshop
- Plasma cutter: clean, fast cuts in steel and stainless sheet. In stock: Maxmech CUT-40 and CUT-60 (Ogba).
- Argon gas and regulator: needed for TIG welding. Argon cylinders and argon regulators are in stock at Mangoro, Ogba and Port Harcourt.
- Oxy-acetylene cutting set: oxygen and acetylene regulators for gas cutting and heating are in stock at Mangoro and Port Harcourt.
- Magnetic drill: drills holes in steel beams and plates on site. In stock: DongCheng DJC23 (Mangoro, Abuja Kubwa, Calabar).
- Generator: if you weld on site, size the generator to your machine. See What Size of Generator Do I Need for Welding?
Starter kit vs workshop kit
| Beginner / small jobs | Full fabrication workshop | |
|---|---|---|
| Welding machine | 200–250A inverter (220V) | 315–400A inverter (380V), plus a TIG welder if needed |
| Cutting | 4.5" angle grinder + cutting discs | 7–9" grinder, 14" cut-off machine, plasma cutter |
| Safety | Auto-darkening helmet, leather gloves, safety boots | Add face shields, aprons, goggles and a fire extinguisher |
| Holding & measuring | 2–4 F clamps, tape, square | Full clamp set, welding table, magnetic drill |
Welding safety checklist
- Never look at the arc without a welding helmet or the correct shade lens.
- Weld in a well-ventilated area; fumes from galvanised or painted steel are toxic.
- Clear flammable materials (fuel, rags, wood shavings) from the work area and keep a fire extinguisher nearby.
- Check cables and holders for damage before every job, and never weld standing in water.
- Switch off the machine before changing electrodes or moving cables.
Frequently asked questions
What equipment do I need to start welding?
At minimum: an inverter welding machine, electrodes, an electrode holder and earth clamp, an auto-darkening helmet, leather gloves, safety boots, an angle grinder with cutting and grinding discs, a wire brush and a chipping hammer.
What is the most important welding equipment?
The welding machine and the welding helmet. The machine decides what you can weld; the helmet protects your eyes, which cannot be replaced.
What size welding machine do I need for fabrication work?
For gates, burglary proofs and light fabrication, a 200–250A inverter is enough. For all-day workshop production with thicker steel, choose 315–400A.
What personal protective equipment (PPE) is needed for welding?
A welding helmet, leather gloves, flame-resistant clothing or a leather apron, safety boots, a face shield or goggles for grinding and cutting, and a respirator when welding coated metals.
Where can I buy welding equipment in Nigeria?
Tikweld supplies welding machines, safety gear, grinders, discs and accessories from branches in Lagos, Abuja and Port Harcourt, with delivery nationwide. Call or WhatsApp 0807 199 3873.
Related guides
- Welding Machine Prices in Nigeria (2026)
- Welding Electrodes Explained: Types, Sizes and Uses
- MIG vs TIG vs Arc Welding Machines
- What Size of Generator Do I Need for Welding?
- Welding & Fabrication Services in Nigeria
Send us your list and we will quote everything in one go. Prices are subject to change, so confirm price and availability before payment.
Call 0807 199 3873 WhatsApp your list sales@tikweld.com