Asmacoat

Waterproofing Coating Asmacoat WP 900 20liters

(10 reviews) Write a Review
SKU:
ASMACOAT-900W
MPN:
ASMACOAT-900W
call for price : 08071993873, sales@tikweld.com

Description

Waterproofing Coating Asmacoat WP 900 20liters

Tikweld products and services is the distributor of Water proofing chemicals in Nigeria including Asmacoat products. ASMACOAT WP 900 is a liquid applied, coal tar modified, single-component moisture- curing polyurethane coating. It is designed to form a seamless, elastomeric waterproofing membrane. When fully cured ASMACOAT WP 900 forms a permanently flexible waterproof lining to most building surfaces including reinforced concrete, block works, brick works, cement render, plaster board and fibre-reinforced cement. The properties like high elasticity, very good crack bridging and impermeability to water vapour make it capable of effectively waterproofing even in most demanding conditions.

Waterproofing Coating Asmacoat WP 900 20liters advantages:

• Single component ready for use (no mixing required).
• Excellent elasticity, allows expansion and contraction with the substrate, without cracking or becoming brittle.
• Excellent chemical resistance.
• High thermal stability which eliminates melting and flowing at high temperature. • Excellent workability.
• Excellent adhesion to wide range of construction materials.
• Provides a continuous, seamless waterproofing membrane.
• Easy to repair.

Uses:

ASMACOAT WP 900 can be used for a wide range of waterproofing applications viz. Roofs, Basements and Foundations, Tunnels and bridges, Terraces and Balconies, Car Decks, Plaza Decks, Planter Boxes, Retaining Walls, Internal Wet Areas (kitchens, bathrooms), Fountains and Pools..., etc. ASMACOAT WP 900 can also be used in sewages works and tanking applications in areas where aggressive ground water conditions prevail.

Surface Preparation:

New concrete surfaces should be fully cured. Substrate should be free from dust, oil, curing agent residues and other contaminants. Voids and honeycombs must be patched with concrete repair products. Allow the patched area to cure before applying the membrane.

All metal surfaces should be made clean of paint, oils, rust and other contaminants. Abrade to expose bright metal then wipe clean the surface prior to priming.

Normally good quality concrete substrates do not require priming. However, porous surfaces require priming. To reduce blisters caused by air entrapment on rough and porous surfaces, use ASMACOAT WP 900 thinned with 50% ASMACOAT WP SOLVENT as a primer. To join fresh applications of ASMACOAT WP 900 to those that are more than 48 hours old, apply diluted ASMACOAT WP 900with 50% ASMACOAT WP SOLVENT as a primer at the interface.

Expansion and movement joints should be sealed with ASMACO PU 90 / ASMACO PU 90 L PU Sealant. When cured, a 200 mm wide layer strip of ASMACOAT WP 900should be applied centered over all sealed joints. While the membrane is still wet, cover with a correct cut stripe of fiber mesh and press it to soak. Saturate the fiber mesh with another coat of ASMACOAT WP 900 until it is fully covered. Allow curing before applying the waterproofing membrane.

Specifications

roperties


Typical result

Appearance

Black medium viscosity liquid

Specific gravity

1.29

Elongation at break

600%

Tack free time @ 25oC, 50% RH

12 hours

Full cure @ 25oC, 50% RH

2 days @ 1.3 mm thickness

Tensile strength

2.5 N/mm2

Crack bridging

No loss, passes the test

Water vapour transmission

0.03g/h/m2

Swelling in water

page2image1261713168

Nil

 


Hardness


38 Shore A

Service temperature

-5 to 75OC

Tear resistance

11.5 N/mm

Chemical Properties:

Good resistance against acidic and alkali solutions, detergents, seawater and oils.

Consumption:

1.3 Kg/m2 per millimeter thickness.

Cleaning:
Tools and equipment used for application of ASMACOAT WP 900 should be cleaned with ASMACOAT WP SOLVENT after use.

Packaging:

The product supplied into sealed metallic container of 20 Lt.

Storage:

Keep the product in tightly closed original containers in a dry place away from direct sunlight at a temperature between +5 and 30OC. The ASMACOAT WP 900 will have 12 months shelf life if stored in original unopened container below 25OC. A thin layer of skinning is considered normal and will not affect the performance of the product.

Limitations:

Don't apply the product with imminent rain forecast, or on humid support. ASMACOAT WP 900 should not be applied on surfaces with a risk of rising dampness and should not be applied at temperature below 5 °C. The minimum application life for the opened pack is up to 48 hours if stored in closed and dry container. Water test should be run after the membrane is fully cured. For Bitumen substrates, contact the Technical Department at Anchor Allied Ltd for advice. During the peak temperature of the day in the summer season, working area should be covered to prevent direct sun effects.

Health & Safety: Wear gloves, goggles to avoid any contact with eyes and skin. In case of splashes in the eyes wash abundantly with warm water and consult a doctor.

SHIPPING LIMITATIONS: None

Related Article

Epochem 505 Rig wash Industrial Cleaner Technical data sheet pdf-log.png

Sodium Hypochlorite in Water Treatment: A Powerful Solution for Safe and Clean Water

Introduction to Epoxy Flooring: Benefits and Uses

Epochem Sodium Hypochlorite Disinfectant Best use

Contact us for further details and availability within the storefront in your location.

View AllClose

Warranty Information

6 months
View AllClose

10 Reviews

  • 5

    WATERPROOFING COATING ASMACOAT WP 900 20LITERS

    Posted by Unknown on 29th May 2024

    Asmacoat waterproofing coating is impressive. I applied it to my basement walls, and no leaks or dampness since then. Easy to apply and dries quickly. The durability is evident, and it truly delivers on its promise. Highly recommend for anyone needing reliable waterproofing. Five stars.

View AllClose