Fire Hose Reel for Fire Fighting System

Tikweld Welding Supplies and Services is the distributor of quality fire fighting equipment and accessories in Nigeria.

An important piece of equipment in fire fighting. A must have for every building as a safety measure.  Firefighters use these reels to quickly distribute fire hoses from their equipment trucks at the site of a blaze. The fire hose reels are manufactured in both manual and automatic versions and are highly resistant to Oil, Acids, Alkalis and Industrial Chemicals. Also, Resistance to heat, cold and ozone.

Properly used, fire hose reels prevent water hoses from tangling and allow the hoses to be carried in any direction. The attached hoses can apply water to a blaze even if most of the hose is still wound around the reel.

The characteristics of Fire Hose : 

The hose is produced with polyurethane that has high-pressure resistance, oil resistance, corrosion resistance, as well as light and soft.

The body of the hose is made of high tension polyester filaments throughout. The hose is lined with rubber that is resistant to corrosion, abrasion, and high pressure. It is water non-leaking, mild proof, easy to roll, light, flexible.

A fitted brass fire hose reel nozzle and a brass ball valve to ensure long life and durability.

-  A guide arm that is fitted with roller beads to ensure the hose flows freely and doesn’t kink.

-  Side plates that are made from tough powder coated zincalume steel (per AS 4506).

Hose Reel discs are made of 1.2mm Electro Galvanized Steel Sheet, painted with electrostatic powder coating and oven baked. Hose Reel Drum has ribs to give extra strength and avoid twisting. Fire Hose Reels are Corrosive Resistant due to Epoxy Powder Coated paintings. Our Hose Reels are designed, tested and approved to meet the international Standards.

Commonly seen in high buildings, schools, hospitals, churches, residential blocks etc

SPECIFICATION

Hose Reel

Manual LH19/SA, LH25/SA 

Automatic LH19/ASA, LH25/ASA 

Hose reel diameter 580mm

 Hose length 30m

Hose

Diameter of hose: 19mm & 25mm

 Max working pressure: 12 Bar

 Max burst pressure: 42 Bar

 Proof pressure:  24 Bar

 Approval:  BSI EN 694

Nozzle

 Rigid plastic fast opening (Equivalent Diameter 6mm) Shut - Spray - Jet Spray discharge pattern in conical form with a spray angle more than 45° 

                                                                              Spray                                              Jet            

Size                                                                    19mm        25mm                             19mm              25mm

Min. flow rate at 6 bar                                   48               49.5                                 65.9                 83.9

Effective throw range at 2 bar                           >10              >10                                  >3                     >3

Valve Nipple 

Valve shall be of ¾" or 1" ball valve and nipple of ¾" or 1". Body made of brass

Weight: 58kg

CONTACT US for enquiries and availability today