Description
Waterproofing Coating Asmacoat WP 900 20liters
Tikweld products and services is the distributor of Water proofing chemicals in Nigeria including Asmacoat products. ASMACOAT WP 900 is a liquid applied, coal tar modified, single-component moisture- curing polyurethane coating. It is designed to form a seamless, elastomeric waterproofing membrane. When fully cured ASMACOAT WP 900 forms a permanently flexible waterproof lining to most building surfaces including reinforced concrete, block works, brick works, cement render, plaster board and fibre-reinforced cement. The properties like high elasticity, very good crack bridging and impermeability to water vapour make it capable of effectively waterproofing even in most demanding conditions.
Waterproofing Coating Asmacoat WP 900 20liters advantages:
• Single component ready for use (no mixing required).
• Excellent elasticity, allows expansion and contraction with the substrate, without cracking or becoming brittle.
• Excellent chemical resistance.
• High thermal stability which eliminates melting and flowing at high temperature. • Excellent workability.
• Excellent adhesion to wide range of construction materials.
• Provides a continuous, seamless waterproofing membrane.
• Easy to repair.
Uses:
ASMACOAT WP 900 can be used for a wide range of waterproofing applications viz. Roofs, Basements and Foundations, Tunnels and bridges, Terraces and Balconies, Car Decks, Plaza Decks, Planter Boxes, Retaining Walls, Internal Wet Areas (kitchens, bathrooms), Fountains and Pools..., etc. ASMACOAT WP 900 can also be used in sewages works and tanking applications in areas where aggressive ground water conditions prevail.
Surface Preparation:
New concrete surfaces should be fully cured. Substrate should be free from dust, oil, curing agent residues and other contaminants. Voids and honeycombs must be patched with concrete repair products. Allow the patched area to cure before applying the membrane.
All metal surfaces should be made clean of paint, oils, rust and other contaminants. Abrade to expose bright metal then wipe clean the surface prior to priming.
Normally good quality concrete substrates do not require priming. However, porous surfaces require priming. To reduce blisters caused by air entrapment on rough and porous surfaces, use ASMACOAT WP 900 thinned with 50% ASMACOAT WP SOLVENT as a primer. To join fresh applications of ASMACOAT WP 900 to those that are more than 48 hours old, apply diluted ASMACOAT WP 900with 50% ASMACOAT WP SOLVENT as a primer at the interface.
Expansion and movement joints should be sealed with ASMACO PU 90 / ASMACO PU 90 L PU Sealant. When cured, a 200 mm wide layer strip of ASMACOAT WP 900should be applied centered over all sealed joints. While the membrane is still wet, cover with a correct cut stripe of fiber mesh and press it to soak. Saturate the fiber mesh with another coat of ASMACOAT WP 900 until it is fully covered. Allow curing before applying the waterproofing membrane.
Specifications
roperties |
Typical result |
Appearance |
Black medium viscosity liquid |
Specific gravity |
1.29 |
Elongation at break |
600% |
Tack free time @ 25oC, 50% RH |
12 hours |
Full cure @ 25oC, 50% RH |
2 days @ 1.3 mm thickness |
Tensile strength |
2.5 N/mm2 |
Crack bridging |
No loss, passes the test |
Water vapour transmission |
0.03g/h/m2 |
Swelling in water |
Nil
|
Hardness |
38 Shore A |
Service temperature |
-5 to 75OC |
Tear resistance |
11.5 N/mm |
Chemical Properties:
Good resistance against acidic and alkali solutions, detergents, seawater and oils.
Consumption:
1.3 Kg/m2 per millimeter thickness.
Cleaning:
Tools and equipment used for application of ASMACOAT WP 900 should be cleaned with ASMACOAT WP SOLVENT after use.
Packaging:
The product supplied into sealed metallic container of 20 Lt.
Storage:
Keep the product in tightly closed original containers in a dry place away from direct sunlight at a temperature between +5 and 30OC. The ASMACOAT WP 900 will have 12 months shelf life if stored in original unopened container below 25OC. A thin layer of skinning is considered normal and will not affect the performance of the product.
Limitations:
Don't apply the product with imminent rain forecast, or on humid support. ASMACOAT WP 900 should not be applied on surfaces with a risk of rising dampness and should not be applied at temperature below 5 °C. The minimum application life for the opened pack is up to 48 hours if stored in closed and dry container. Water test should be run after the membrane is fully cured. For Bitumen substrates, contact the Technical Department at Anchor Allied Ltd for advice. During the peak temperature of the day in the summer season, working area should be covered to prevent direct sun effects.
Health & Safety: Wear gloves, goggles to avoid any contact with eyes and skin. In case of splashes in the eyes wash abundantly with warm water and consult a doctor.
SHIPPING LIMITATIONS: None
Related Article
Epochem 505 Rig wash Industrial Cleaner Technical data sheet
Sodium Hypochlorite in Water Treatment: A Powerful Solution for Safe and Clean Water
Introduction to Epoxy Flooring: Benefits and Uses
Epochem Sodium Hypochlorite Disinfectant Best use
Contact us for further details and availability within the storefront in your location.
10 Reviews
-
Waterproofing Coating Asmacoat WP 900
Asmacoat WP 900 has exceeded my expectations! It provides a strong, durable seal that prevents water seepage, keeping my surfaces protected. Easy to apply and dries quickly. I highly recommend it for anyone needing reliable waterproofing
-
Waterproofing Coating Asmacoat WP 900 20liters
Asmacoat WP 900 is a reliable choice for waterproofing applications, offering strong protection against water infiltration and durability in various environmental conditions. Its ease of application and compatibility with different substrates make it a versatile option for both residential and commercial projects. While the quantity might require careful consideration for large-scale projects, the overall effectiveness and performance of the coating justify its use for effective and long-lasting waterproofing.
-
WATERPROOFING COATING ASMACOAT WP 900 20LITERS
I used ASMACOAT WP 900 for my rooftop and it worked wonders. The application was straightforward and the coating dried quickly. After a few heavy rains, there's no sign of leakage. The coverage is excellent
-
WATERPROOFING COATING ASMACOAT WP 900 20LITERS
Asmacoat WP 900 is the best waterproofing solution I've ever used. I applied it to the exterior walls of my house, and it created a solid barrier against water. The finish looks professional, and it's been holding up well under harsh weather conditions. Great product for anyone needing reliable waterproofing.
-
WATERPROOFING COATING ASMACOAT WP 900 20LITERS
Asmacoat is an outstanding waterproofing solution. We applied it to our exterior walls, and it's been flawless. Even in torrential rain, there are no signs of leakage. It's easy to apply and very durable. Excellent quality and performance. Highly recommended for peace of mind.
-
WATERPROOFING COATING ASMACOAT WP 900 20LITERS
After applying Asmacoat to our foundation, we noticed an immediate improvement. No more water seepage or moisture issues. The product is easy to use, with clear instructions and quick drying time. Truly a game-changer for home waterproofing. Very satisfied with the result. Highly recommended.
-
WATERPROOFING COATING ASMACOAT WP 900 20LITERS
Asmacoat waterproofing coating worked wonders on our deck. It has withstood several storms without any issues. The coverage is excellent, and it's very user-friendly. Highly effective and reasonably priced. A must-have for anyone dealing with water infiltration problems.
-
WATERPROOFING COATING ASMACOAT WP 900 20LITERS
We used Asmacoat on our flat roof, and it's been fantastic. No leaks during heavy rain, and the application was straightforward. The coating is tough and long-lasting. Great value for money and excellent performance. Couldn't be happier with the results. Highly recommended.
-
WATERPROOFING COATING ASMACOAT WP 900 20LITERS
Asmacoat waterproofing coating is impressive. I applied it to our basement walls, and no leaks or dampness since then. Easy to apply and dries quickly. The durability is evident, and it truly delivers on its promise. Highly recommend for anyone needing reliable waterproofing. Five stars