Askaynak Welding Machine welding inverter 405 ultra
Tikweld welding suplies and services is a distributor and supplier of Askaynak welding machines in Nigeria. Our Askaynak welding machine welding inverter 405 Ultra is a high performance welding machine that is compatible for generator use and with Thermostatic overload protection and indicator light. We have stock of this electric welding inverter in all Tikweld Welding Supplies and services store in Nigeria.
Features and advantages of Askaynak Welding Machine welding inverter 405 ultra
-
LOWER ELECTRICITY BILL and INFRASTRUCTURE COST
-
THE MOST POWERFUL IN ITS CLASS 400 A @ 45% DUTY CYCLE
-
Digital inverter technology
-
Thermostatic overload protection and indicator light
-
Compatible for generator use
-
High performance even with long cables
-
20,5 weight
-
Fan cooling
-
IP21S protection class
-
Meet EN60974-1, EN60974-10 and CE standards for safety and reliability
-
Two years warranty on parts and labor
Airforce and Hard Start
Arc-Force gives a power source variable additional amperage during low voltage (short-arc-length) conditions while welding. Helps avoid "sticking" stick electrodes when a short arc length is used.
Hot-Start used on Inverter 405-Ultra makes it easier to start difficult-to-start electrodes and used for arc starting only.
Technical properties of Askaynak Welding Machine welding inverter 405 ultra
| Nominal Mains Voltage |
: |
380-400 V; 3~Ph ; 50/60 Hz |
| Max. Power Consumption |
: |
17,5 kW (45%) |
| Mains Current |
: |
26 A (45%) |
| Max Effective Current |
: |
15,4 A |
| Power Factor |
: |
0,96 (45%) |
| Welding Current Values |
: |
400 A; 36,0 V (45%)
240 A; 29,6 V (100%)
305 A; 32,2 V (60%) |
| Open Circuit Voltage |
: |
50 V (DC) |
| Welding Current Setting Range |
: |
30 - 400 A |
| Fuse Value and Type |
: |
3x32 A (delay action) |
| Protection Class |
: |
IP21S |
| Cooling System |
: |
Ventilation cooling |
| Weight (excl. Cables) |
: |
20,5 kg |
| Dimensions (WxHxD) |
: |
240 x 440 x 540 mm |
| Approvals |
: |
EN 60974-1, CE, EN 60974-10 |
FREQUENTLY ASKED QUESTIONS
1. HOW CAN A DEFECTIVE WELDING MACHINE BE IDENTIFIED?
Lack of consistency, cracks running through the middle of the bead, a bead that is too thin, and/or a lack of parent metal discoloration (which should be about 1/8 of an inch) are indications of a subpar welding process.
2. WHICH WELDING TAKES LESS TIME?
MIG welding. This is because MIG welding is quicker than TIG welding, and can be produced at a lesser cost. Additionally, MIG welding is simpler to master, and to create welds that require little to no cleaning and finishing.
3. WHAT'S THE STRONGEST WELD?
What Type Of Weld Is The Strongest? TIG welding is often considered the strongest weld since it produces extreme heat, and the slow cooling rate results in high tensile strength and ductility. MIG is also an excellent candidate for the strongest type of weld because it can create a strong joint.
Related article
Contact us for product availability.
Contact Tikweld welding supplies for more enquiries
