LubeMax Heat Premium Oil

Tikweld Welding Supplies and Services is the distributor and supplier of LubeMax Lubricants in Nigeria. LubeMax Heat premium oils is based on carefully selected, highly refined mineral oils chosen for their ability to provide superior performance in indirect closed fluid heat transfer systems.

PRODUCT APPLICATION

Enclosed circulated heat transfer systems for industrial applications such as process industry, chemical plants, textile producers etc. and in household equipment such as oil filled radiators. LubeMax Heat premium oils can be used in high temperature continuous heat transfer equipment with the following application limits:

Max. film temperature : 320ºC

Max. bulk temperature : 300ºC

Extended maintenance intervals

LubeMax Heat premium oils is based on carefully selected highly refined mineral oils and resists oil cracking, oxidation and thickening. This provides extended oil life, provided efficient fluid heating and good pump circulation is ensured, such that film temperatures on the heater surface do not exceed the limits below.

System efficiency

Low viscosity enables excellent fluidity and heat transfer over a wide temperature range. LubeMax Heat premium oils also has a low vapour pressure so resists cracking. This minimises the formation of volatile decomposition products; these would require recovery via expansion chamber and condensate collector.

Wear protection

LubeMax Heat premium oils is non-corrosive and has high solvency – this reduces deposit formation by holding oxidation products in solution and keeping internal surfaces of heat exchangers clean. Enclosed circulated heat transfer systems for industrial applications such as process industry, chemical plants, textile producers etc. and in household equipment such as oil filled radiators.

TECHNICAL PROPERTIES

Density @20^oC kg/m2; 857

Flash Point (PMCC) ^oC; 208

Flash Point (COC) ^oC; 220

Kinematic Viscosity @40oC mm2/s; 29

Kinematic Viscosity @100oC mm2/s; 5.1

Kinematic Viscosity @200oC mm2/s; 1.4

Initial boiling Point ^oC; 330

Auto Ignition tempt; 332

Neutralisation value mgKOH/g; <0.2

Ash oxide %m/m; <0.01

Carbon Residue (Conradson) %m/m; <0.01

Copper Corrosion (3hrs/100 ^oC); Class 1

Coefficient of Thermal Expansion 1/^oC; 0.0008

Contact us for Lubemax lubricant and other quality lubricants.