Horizontal Auger Feeder ISRK-8 Hozain

 Tikweld Welding Supplies and Services is the distributor of Hozain Arigcultural Machines in Nigeria.

 This Horizontal Auger Feeder ISRK-8 Hozain is a two-stage gearbox which allows you to get 4 speeds of rotation of the screws and select the optimal operating conditions depending on the type of feed loaded and / or their condition (frozen, wet, long-fiber). Screw rotation speed - 15; 21; 26; 45 rpm.  The load on the PTO is reduced and the tractor engine operates in an economical mode, which increases the tractor's resource and reduces the fuel consumption by 20%. The time of the entire technological process is reduced and, accordingly, productivity is increased by more than 20%.

Recommended for farms with aft walkways and equipped driveways.

The widest basic equipment of Horizontal Auger Feeder ISRK-8 Hozain

   - One-piece mixing hopper;

   - special towing hitch for reliable aggregation with MTZ 1.4-2 class tractors;

 - 2-speed planetary gearbox (Italy);

 - Autonomous (independent of the tractor) hydraulic system (Italy);

 - Electronic weight measuring system with Russified scoreboard (Italy);

  - Remote control from a tractor cabin (Italy);

  - Seamless spirals of screw augers (Italy);

- Operational documentation in Russian;

  - Rubber sides (inclined inward, which prevents the feed from spilling out during mixing);

   - tires 295/80 R 22.5 or 265/70 R 19.5 (except ISRK-12F);

 - High hitch (90 cm) with a reinforced shackle;

  - Unloading conveyor on the left, tray on the right;

  - Pneumatic single-circuit brake system;

  - Knives made of high quality steel;

  - Manual parking brake;

 - lighting devices.

Additional installation is possible:

  - Second unloading conveyor;

   - Programmable scales;

   - a wide-angle driveshaft with a safety and overrunning clutch;

   - set of extension boards (+2 cubic meters)

  - mounted straw blower.

 - Magnetic catcher 800 mm.

Contact us today.