Horizontal Auger Feeder ISRK-12G Hozain

 Tikweld Welding Supplies and Services is the distributor of Hozain Arigcultural Machines in Nigeria.

This Horizontal Auger Feeder ISRK-12G Hozain is designed specifically for large livestock farms, and the installation of additional equipment - a grab loader - made it possible to mechanize the loading of long-fiber components of the feed mixture (hay, straw, haylage) into the mixing tank of the feed dispenser. The grab is mounted on the rear wall of the feeder.

Such an arrangement of the grab loader does not increase the dimensions of the machine in height and width in the transport position, as is the case in imported counterparts, where the grab is located on the side. The most important advantage of the rear location of the grab is the ability to feed the feeder in reverse of the tractor into the loading area, including in trenches for silage / silage.

The grab is driven by the onboard hydraulic system of the feed distributor and controlled by one tractor operator from the grapple installation area.

Our Horizontal Auger Feeder ISRK-12G Hozain allows you to significantly save on costs when operating self-propelled loaders with their maintenance personnel, which, together with the main advantages of the basic modification of Horizontal Auger Feeder ISRK-12G Hozain, allows it to be considered a more advanced model. /

The Widest Basic Equipment of Horizontal Auger Feeder ISRK-12G Hozain

   - mixing hopper of one-piece construction with a special protective coating;

   - Special TSU for reliable aggregation with MTZ tractors;

 - Autonomous (independent of the tractor) hydraulic system (Italy);

 - Remote control from a tractor cabin (Italy);

 - Seamless spirals of screw augers (Italy);

 - Electronic weight measuring system with Russified scoreboard (Italy);

 - 2-speed planetary gearbox (Italy);

   - Operational documentation in Russian;

- tires 295/80 R 22.5;

  - High hitch (90 cm) with a reinforced shackle;

 - Unloading conveyor on the left, tray on the right;

 - Rubber sides,

   Inclined inward, which prevents the feed from spilling out when mixing;

  - Pneumatic brake system;

 - Knives made of high quality steel;

- Manual parking brake;

- lighting devices.

Additional installation is possible:

  - Unloading conveyor;

 - Programmable scales;

   - Wide-angle cardan shaft with safety and freewheel clutches;

 - A set of edged boards (+2 cubic meters) are

  Tilted inward, which prevents spillage of the feed when mixing;

 - mounted straw blower;

 - Magnetic atcher 800 mm.

Technical Specifications of Horizontal Auger Feeder ISRK-12G Hozain

Indicator              ISRK - 12G

A type   semitrailer

Capacity, t / Bunker capacity, cbm.           3. 5 / 12

Weight, no more              5200

Dimensions, m, not more, LxWxH

when the size of tires 295/80 R22. 5         6, 8h2, 35h2, 54

when the size of tires 265/70 R19. 5         6, 8h2, 35h2, 45

Track width, mm              1680

Clearance mm, not less than       420

The maximum height of the feed cross conveyor unloading, mm              700

Transport speed with / without load, km / h, max             8/12

Working speed distribution of feed, km / h, max               5

Service life, years             10

Hydraulic drive of the conveyor and bolts             autonomous

drive the screws               PTO tractor

Number / type of screw               2 / horizontal

Service staff       1 tractor

Grapple Weight, kg         300

Departures max boom, mm        3200

Rotation angle, deg.       240

Class / tractor power (hp), min  1. 4 / 80

food supply, min / max, t / h       15/120

Contact us today