GRABO

GRABO Electric Vacuum Suction Cup Lifter GRABO PRO-Lifter 20, 16W , 0.1” (3mm)

(1 review) Write a Review
SKU:
PRO-Lifter 20
₦0.00

Description

Electric Vacuum Suction Cup Lifter GRABO PRO-Lifter 20 

Tikweld Industrial Supplies is the distributor and supplier of GRABO Lifting Equipment in Nigeria. Our Electric Vacuum Suction Cup Lifter GRABO Pro-Lifter 20 is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 375 lbs . In order to lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored.
 
The Electric Vacuum Suction Cup LifterGRABO Pro-Lifter 20 is designed for professionals. Unlike the other gigantic solutions, the tool is portable and handy. Living up to the promise of “Heavy Lifting – Made Easy”, the GRABO Pro is equally effective on smooth as well as coarse surfaces. The Pro-Lifter has a pumping capacity of 20 liters per minute, a best in class. So, say good-bye to unreliable, and often dangerous, manual suction cups for the job. With GRABO Pro you double your work efficiency with enhanced safety.

The tool is ergonomically designed to provide better grip and less fatigue when moving heavy objects. The tool is an effective vacuum lifter even for dusty, semi-porous or rough surfaces. The tool works perfectly with glass, wood, ceramic tiles, metals and other materials. Just like the Classic version the powerful vacuum pump and rechargeable battery pack are concealed within the grab handle. 

 

Technical Specifications of Electric Vacuum Suction Cup Lifter GRABO PRO-Lifter 20 

 

Model/SKU

GRABO PRO-LIFTER 20 / GP-1Li-FB

Battery

14.8VDC 2600mAh Li-ion

Rated Power

16W

Charger Input Voltage

100-240VAC 50/60Hz

Battery Charging Time

~2hrs

Non-Stop Running Time (Full Charge)

1.5hrs

Running Cycles (On Full Charge)

900 ON-OFF cycles of 10 seconds

Stand-by Mode (Charge Hold)

30 days

Pump Service Life

100000+ ON-OFF cycles / 800+ hrs continuous

Rated Air Flow

0.7cfm (20 L/min)

Maximum Vacuum Rate

11.6Psi (0.8 Bar, 80 kPa)

Maximum Lifting Capacity

375Lbs (170 kg)

L x W x H

11.77 x 7.22 x 4.76” (300 x 184 x 121 mm)

Net Weight (With Battery)

3.2Lbs ( 1.5 kg )

Working Temperature

32°F~140°F ( 0°~60 °C )

Applicable Surface Type

Peak/valley heights less than 0.1” (3mm),

arc less than 5°

Additional Features

Pump stops automatically at maximum vacuum

rate ( 11.6Psi / 0.8 Bar )

Contact us  we have products available in all our stores nationwide. Tikweld.com

View AllClose

Warranty Information

6 Month
View AllClose

1 Review

  • 5
    Wonderful

    Posted by Engr Wilfred Anele on 25th Apr 2022

    Wow, I was so scared using this suction cup, but I felt comfortable with how it was able to hold the glass I was working on. thanks, Tikweld, GRABO ELECTRIC VACUUM SUCTION CUP LIFTER GRABO PRO-LIFTER 20, 16W, 0.1” (3MM)

View AllClose