Hot deep galvanized carriage bolt 5/16"-18 Hellog

Tikweld Welding Supplies and Services is the major supplier of Hellog Products in Nigeria. The Hot deep galvanized carriage bolt 5/16"-18 Hellog is made from low or medium carbon steel with a hot galvanized finish that meets the ASTM A153 standard.

Our Hot deep galvanized carriage bolt 5/16"-18 Hellog Lengths out to 6 inches will be fully threaded, lengths over 6 to 12 inches will have 6 inches of thread and the square neck is designed to keep the bolt from turning as a nut is tightened and also most commonly used for connecting wood structures.

Features of Hot deep galvanized carriage bolt 5/16"-18 Hellog

• Hot dipped galvanized carriage bolts provide anti-corrosive protection to the fastener, and is typically used with treated lumber installations.
•   The length of a carriage bolt is determined by measuring from under the head of the bolt to the base of the threads.
• Carriage bolts are pushed into a hole with the same diameter as the shank and then often hammered into place where the square shoulder locks it in place.
• Hot Dipped Galvanized assemblies should be used exclusively. If you use a HDG bolt you must also use a HDG nut.

Specification of Hot deep galvanized carriage bolt 5/16"-18 Hellog